A firm hand balm for climbing — and the wooden box it lives in

Climbing is hard on your hands. This is the beeswax, shea butter and coconut oil balm I'm making — firm enough to travel in a small wooden box.

Chalk, tape and a few sessions on sharp rock do a number on your hands. By the end of a day at the crag the skin on your fingers feels tight and papery. Those are easy to buy (at a premium) so I’m making my own balm. I made it before, but never wrote it down and always forget how I made it. This will be a record of the process

Why firm matters

Most hand creams are largely water and are designed to rub in and vanish. That’s fine at a desk, but this balm isn’t going in a chalk bag — it stays at home and gets used at the end of the day. A soft balm is still awkward in a small wooden box: in a warm room it creeps up the sides and sticks to the lid.

A higher proportion of beeswax gives a balm that holds its shape at room temperature and only gives way when you work it between your fingers. It also leaves a light barrier on the skin, which is what you want after a session has stripped your hands of their own oils. Push the wax too far, though, and it becomes waxy and hard to spread. This sits on the firm side of spreadable, deliberately.

The ratio

This is a 100 g batch. A tin this size holds about 20–25 g of finished balm, so that makes four or five boxes:

  • Beeswax — 25 g. The structure. This is the reason it isn’t a soft balm (I sourced mine at a local farmers market from a beekeeper in co Wicklow).
  • Shea butter — 30 g. The rich, restorative part, without the greasy finish (no local supplier Unfortunately)
  • Coconut oil — 44 g. Carries the rest and sinks in quickly (Lidl!)
  • Essential oil — 1 g, roughly 20–25 drops. Scent only; 1% is plenty for something you rub into your hands (local shop with smelly stuff).

If it sets up too hard, drop the beeswax to 20 g and add that 5 g to the coconut oil. If it’s still too soft, take the wax towards 30 g — past that it starts to feel like a candle.

Worth knowing: coconut oil sets firm in a cold room and softens in a warm one, so the finished balm will change a little with the weather. Judge the texture after a full day at room temperature, not straight after pouring.

Making it

  1. Set a small pan of water to simmer and put a heatproof bowl or jar over it.
  2. Add the beeswax and shea butter and let them melt together, stirring now and then.
  3. Once both are liquid, stir in the coconut oil until the mixture is clear.
  4. Take it off the heat and let it cool for a minute or two, then stir in the essential oil. Adding it while the mixture is still hot drives off most of the scent.
  5. Pour into the container and leave it alone to set. It can look settled after an hour, but give it a full day before deciding what you think of the texture.

The box

The container is the other half of this. I’m turning small lidded boxes on the lathe, sized to hold one 20–25 g portion each — roughly 48 mm across inside with 20 mm of usable depth, 4 mm walls and a 5 mm base, which puts the outside diameter at 56 mm.

Four things I’m watching as I make them:

  • Leave a little headroom so the balm never touches the lid.
  • I don’t finish it – the balm itself is the finish.
  • A firm balm earns its keep here. A soft one would slosh about and stick to the lid in a warm room.
  • The lid is meant to be friction fit – bonus points for a fun climbing hold like shape!

Pictures to follow